Origin	China
Model Number	AQU90

UF Membrane Modules for Water Treatment—AQU90 (4 inch)

Main features:

1.        Comparing to the product of the same kind and specification product, length is lengthen 100mm and membrane area increase 15% in the result of raising of water yield.

2.        Conglutinating the joint of shell by France gumwater make sure it not leak and break and perfectly reach sanitation standard.

3.        The shell making of UPVCï¼ÂÂŒis more flexible, resistant to aging, able to bear acid and alkali, and applicable for widely operating condition.

4.        Besides UPVC, there are ABS and organic glass to choose.

Technical Parameters:

Overall dimension: Φ90×1192mm

Interface dimension: Φ32 (DN25)

Connnection Mode: slipknot adhesion

Shell material: UPVC, ABS, organic glass

Membrane filament material: hydrophilic PVC

End seal material: epoxy resin

Configuration: hollow fiber

Working Temp.:5-45

PH range: 2~13

Max TMP: 0.2Mpa

Continous Tolerance to chlorine: 100ppm

Tolerance to chlorine for short-term: 200ppm

Max inlet pressure: 0.3Mpa

Filtrate turbidity < 0.1NTU
Product water SDI < 1

Removal rate of animalcule and bacterium::99.99%

Removal rate of suspendend solids:100%

Applicable field:

1.        Dual water supply, drinking water, municipal drinking water, rural water improvement, purification of residential water etc.

2.        RO pretreatment of iron &steel industry, power industry, electronic industry, chemical industry etc.

3.        Waste water recycling of printing and dyeing industry, paper making industry, electroplating industry, electronic circuit board industry, municipal sewage, oil field injection water,coal mine waste water,etc.

4.     Seperation of soybean protein, heat source removal of medicine, recycling of electroplating, recycling of starch, food and drink, etc.