Origin |
China |
Model Number |
AQU250 |
Hollow Fiber UF Membrane Modules--AQU250 (10 inch)
Main features:
1.Wall thickness thickening of end cover and reinforced rib explosion-proof design make the pressure bearingg capacity over 1.6Mpa.
2.Central tube structure can make the water be distributed uniformly and the effects of back wash become better.
3.There are two outlets above and below that can back wash both by the two ones.
4.Especially design for quickly, conveniently fixing and good sealing property joint.
5.Stainless steel hoop make sure membrane not metamorphose and slack.
6.There are two kind of material of tube body to choose that can fill more demand of our clients.
7.End seal material: epoxy resin with high hardness, excellent strength, superior toughness and good hygienism grade.
Technical Parameters:
Overall dimension: Φ250×1420mm (AQU250A), Φ250×1740mm (AQU250B), Φ250×2180mm (AQU250C)
Interface dimension: Φ63 (DN50)
Connnection Mode: DN50 fast assemblying sleeve connection
Shell material: UPVC
Membrane filament material: hydrophilic PVC
End seal material: epoxy resin
Configuration: hollow fiber
Working Temp.:5-45
PH range: 2~13
Max TMP: 0.2Mpa
Continous Tolerance to chlorine: 100ppm
Tolerance to chlorine for short-term: 200ppm
Max inlet pressure: 0.3Mpa
Filtrate turbidity < 0.1NTU Product water SDI < 1
Removal rate of animalcule and bacterium::99.99%
Removal rate of suspendend solids:100%
Applicable field:
1.Dual water supply, drinking water, municipal drinking water, rural water improvement, purification of residential water etc.
2.RO pretreatment of iron &steel industry, power industry, electronic industry, chemical industry etc.
3.Waste water recycling of printing and dyeing industry, paper making industry, electroplating industry, electronic circuit board industry, municipal sewage, oil field injection water,coal mine waste water,etc.
4.Seperation of soybean protein, heat source removal of medicine, recycling of electroplating, recycling of starch, food and drink, etc.
|